18W CF Electronic Airtight IC Remodel Housing, 120V (CA Title 24)
Specifications:
*Trim and light bulb sold separately*
- Material: Galvanized Steel
- Mounting: 4 high tension tempered steel springs
- Socket: Vertically mounted 4-pin CF socket, type G24q-3
Ballast:
- Electronic; Air-tight
- Voltage: 120V
- Frequency: 50/60 Hz
- Starting Temperature: 0 F
- Start Rating: >50,000
- Power Factor: HPF
- Flicker: < 3%
- THD: < 10%
Dimensions:
- Length: 13 1/8"
- Width: 4 3/4"
- Height: 6 3/8"
Lamping:
- 1 x 18W 4-Pin CFL (Sold Separately)
Model:
NHRPIC-418ELAT

18W Four Pin Electronic Compact Fluorescent
18W Four Pin Electronic Compact Fluorescent
Features:
- T4 Bulb Type
- G24q-2 Base
- Color Rendering Index (CRI): 82
- 12000 Average Rated Hours
- 1250 Lumens
- 18 Watts
Color Temperature:
- 2700K = Warm White
- 3000K = Soft White
- 3500K = Neutral
- 4100K = Cool White
Models: S8333 , S8334 , S8335 , S8336
Do you have a lighting question ? Call us now (877) 250-6888 or email: customerservice@lbclighting.com
Compliance:
• UL listed 
• cUL listed 
• Energy Star rated 
• Title 24 rated 
• Suitable for Damp Conditions 
• Suitable for Wet Conditions 
The UL Mark is widely recognized by consumers, retailers and authorities who trust UL's integrity and commitment to consumer safety. With this in mind, UL tests every product to the highest standards to insure that any item that carries the UL Mark can be used by the consumer with confidence.
cUL Mark is the UL Mark for Canada. Products with this type of mark have been evaluated to Canadian safety requirements, which may be different from US safety requirements.
This is an Energy Star rated product that meets strict energy efficiency guidelines set by the US Environmental Protection Agency.
The Energy Efficiency Standards for Residential and Nonresidential Buildings that were established in 1978 in response to a legislative mandate to reduce California's energy consumption. The standards are updated periodically to allow consideration and possible incorporation of new energy efficiency technologies and methods.
Damp locations are sheltered outdoor areas that are protected from direct contact with rain or water.
Wet locations are unsheltered outdoor areas that are exposed to direct contact with rain and water.