Tech One Circuit Monorail Surface Transformer - 300W, 12V Magnetic, Single Feed

Satin Nickel

Satin Nickel


Usually Ships In: 5 to 10 Business Days


More Information

300W single feed surface mount magnetic transformer for LED or halogen loads. For use with Tech Lighting's one-circuit monorail system.


  • Type of Transformer: Magnetic

  • Input Voltage: 120V

  • Output Voltage: 12V

  • Wattage: 300 Watts

  • Feed: Single Feed

  • Finish: Antique Bronze, Satin Nickel


  • This single-feed transformer converts standard 120 line voltage to 12 volts to provide the necessary voltage for powering a monorail low voltage lighting system

  • It can power lamps totaling up to 300 watts

  • The transformer is concealed inside a decorative housing with a fast acting secondary circuit breaker that will safely turn the system off should a short occur

  • Once the short has been removed the unit can be reset by simply flipping the wall switch off and back on

  • This product can mount to either a 4" square electrical box with round plaster ring or octagon electrical box (not included).

  • Rail is installed through the power feed on the canopy to bring power to the run

  • Black and white finish have satin nickel feeds

  • The shortest rigid standoff that can be used with this surface transformer is the 4" rigid standoff (sold separately)

  • If dropping the rail more than 4" below the ceiling, order the desired rigid standoff length and one compatible power extender (sold separately)

  • 12V transformers require the use of 12V lamps

*MFG Part Number*:

700MOSRT30DB , 700MOSRT30DS , 700MOSRT30DW , 700MOSRT30DZ

Write Your Own Review

You're reviewing: Tech One Circuit Monorail Surface Transformer - 300W, 12V Magnetic, Single Feed