Nora Lighting

The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain...

Features Ceiling extension collar allows NSIC-4LMRAT new construction housings to install in ceiling thicknesses up to 1.75″. Spec Sheet

4″ Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4″ retrofit luminai...

4″ Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4″ retrofit luminai...

4″ Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4″ retrofit luminai...

Dedicated new construction housing for use in insulated ceilings can be in direct contact with insulation. Features Trim sold separately Voltage: ...

4″ Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4″ retrofit luminai...

4" Iolite reflectors can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable reflectors optimize visual cut-...

Dedicated remodel housing for 4″ Iolite reflectors. Rated for use in insulated ceilings and can be in direct contact with insulation. Air-tight con...

For new construction pre-wiring and easier layout planningFeatures: Color: Silver Includes wire clip that holds low voltage connector close to cut-...

4" Iolite reflectors can be specified for use with Iolite new construction or remodel housings. Adjustable slot aperture focus the beam spread thro...

Cobalt retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others Features: Housing sold separa...

4" Iolite reflectors can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-...

2" Iolite reflectors can be specified for use in new construction or remodel applications. Die-cast adjustable cone reflectors optimize visual cut-...

1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Bullnose reflector with a filleted aperture whi...

Powers track system from the end of a run. Includes two knockouts and can be utilized on hard, grid ceilings, or pendant suspended track. Current L...

Nora 36" Pendant Assembly KitPendant assembly kit can be used to suspend track from ceiling, as well as feed the track with NT-316 (one circuit fee...

Nora Slope Adapter - 3 Wire TrackFor use with J-Style Track Fixtures to be mounted on Nora Lighting Track System in a sloped ceiling application or...

Nora 48" Pendant Assembly KitPendant assembly kit can be used to suspend track from ceiling, as well as feed the track with NT-316 (one circuit fee...

Nora Wire Way CoverFor track to be wired through stem.Features: For use with one-circuit or two-circuit track For track to be wired through stem (N...

Nora 24" Track Extension RodExtends track fixtures from track, NTL-2200 transformer, or track monopoints.Features: For use with one-circuit or two-...

Nora 24" Pendant Assembly KitPendant assembly kit can be used to suspend track from ceiling, as well as feed the track with NT-316 (one circuit fee...

Nora 18" Pendant Assembly KitPendant assembly kit can be used to suspend track from ceiling, as well as feed the track with NT-316 (one circuit fee...

Nora Two-Circuit X-ConnectorUsed to connect four pieces of track together in a "X" shape and carry the electricityFeatures: For use with two-circui...

Nora Two-Circuit T-ConnectorUsed to connect three pieces of track together in a "T" shape and carry the electricityFeatures: For use with two-circu...

4" Iolite reflectors can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable surface gimbals adjust to aim t...

4” Iolite reflectors can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-...

Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum ...

Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum ...

Features Mounting: Bar hangers are adjustable from 13-3/4" to 26" with integral nails. Bar hangers are slotted for T-bar ceiling grids. Dimensio...

Features Size: 1" Finish: Matte Black, Bronze, Matte Powder White Dimensions Width: 2.38" Documents Spec Sheet  

Allows 4″ Iolite PLUS square trimless to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall an...

Features: Housing sold separately Type: Square Reflector Lumens: 2000 lm Color Temperature: 3000K CRI: 90+ Reflector/Flange Finish: White/White T...

Features: Housing sold separately Type: Square Reflector Lumens: 1500 lm Color Temperature: 2700K, 3000K, 3500K, 4000K CRI: 90+ Reflector/Flange F...

Features: Housing sold separately Type: Round Baffle Lumens: 2000 lm Color Temperature: 2700K, 3000K, 3500K, 4000K CRI: 90+ Reflector/Flange Finis...

Features: Housing sold separately Type: Round Baffle Lumens: 1500 lm Color Temperature: 2700K, 3000K, 3500K, 4000K CRI: 90+ Reflector/Flange Finis...

Features: Housing sold separately Type: Round Reflector Lumens: 1500 lm Color Temperature: 2700K, 3000K, 3500K, 4000K CRI: 90+ Reflector/Flange Fi...

Dedicated IC Air-Tight new construction housing for use in insulated ceilings, can be in direct contact with insulation. Air-tight construction pro...

Dedicated IC Air-Tight new construction housing for use in insulated ceilings, can be in direct contact with insulation. Air-tight construction pro...

This system is designed for use with Nora 1-circuit (NT-300 Series) or 2-circuit (NT-2300 Series) track. The extruded aluminum housing is mounted i...

This system is designed for use with Nora 1-circuit (NT-300 Series) or 2-circuit (NT-2300 Series) track. The extruded aluminum housing is mounted i...

This system is designed for use with Nora 1-circuit (NT-300 Series) or 2-circuit (NT-2300 Series) track. The extruded aluminum housing is mounted i...

This system is designed for use with Nora 1-circuit (NT-300 Series) or 2-circuit (NT-2300 Series) track. The extruded aluminum housing is mounted i...

This system is designed for use with Nora 1-circuit (NT-300 Series) or 2-circuit (NT-2300 Series) track. The extruded aluminum housing is mounted i...

This system is designed for use with Nora 1-circuit (NT-300 Series) or 2-circuit (NT-2300 Series) track. The extruded aluminum housing is mounted i...

The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain...

4″ Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4” retrofit luminai...

4″ Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4” retrofit luminai...